The Hidden Node Problem

-

RTS CTS to the Rescue:


Even with CSMA/CA, the collision can be tried to avoid but not be guaranteed. Let us look at the below scenario to understand the Problem:

Node A sees that there is no active transmission going on and has data to send to Node B. At the same time Node C also sees that there is no active transmission and has to send data to Node B. Both Node A and Node C sees a clear channel and sends data to Node B.
Node B will receive corrupted data from Node A and Node C and will not send ACK to either.

Since Node A and Node C cannot listen each others transmission they find that the Channel to be free. This kind of problem is called as Hidden Node Problem where in the Nodes which aren't able to identify Channel utilisation at the receivers side, tend to assume that the channel is free and start Transmitting. This results in data corruption at the receivers end.

Node B will receive corrupted data from Node A and Node C and will not send ACK to either. If after multiple retries Node A and Node C does not receive ACK from Node B, they start using RTS CTS mechanism to overcome this problem.

Solution:

Node A after seeing multiple failures will resort to RTS CTS mechanism. Now Node A, before transmitting the actual data packet, sends a Ready To Send packet which indicates that Node A has data to send to Node B. Node B, on recieving RTS, senses the medium and replies with Clear To Send packet if the channel is free. If the channel is not free then CTS is not sent thus stopping Node A to send any data packets. Node A now knows that the channel is being utilized at Node B's end and defers its transmission for random interval of time and tries again with RTS. 

Once Channel at Node B is also free, Node B replies to RTS with a CTS and Node A starts its data transmission.

In this way using RTS CTS solves the Hidden node problem.

Please feel to ask questions if you need more clarity. I am also open to constructive feedback.

Comments

  1. Unknown18 February 2019 at 23:04

    Hi Pavan,
    Good explanation very easy to understand. It will be very helpful if you share sniffer capture as well.

    Thanks,
    Khaja

    ReplyDelete

Post a Comment

Popular posts from this blog

Wifi Roaming Techniques : Pre-Authentication, PMK Caching, OKC, Fast Transition - 11r

-
Image
Wifi Roaming Techniques: Roaming is one of the most crucial aspect of Wifi. Roaming in simple terms is Handing off Client connectivity from one Access point to another without losing connectivity. When the Client sees that the RSSI ( signal Strength ) of connected AP is decreasing, the Client does a roam Scan and sees if there are other APs with better RSSI. Once it identifies the better AP, it starts association with this AP. This process is called Roaming. Why is Roaming Important: Wifi is mostly used in devices which are mobile such as mobile phones, Laptops etc. User intend to use these device while moving from one place to another and it is expected that the devices are always connected to wifi and the user can continue his work seamlessly. It would not be desirable that wifi keeps disconnecting and connecting to other Access Point while the user is moving, there should be a way where in the client can remain connected to wifi network while it moves. This issue is add
Read more

802.11w Protected Management Frames (PMF)

-
Image
802.11w Protected Management Frames Why? As you are aware that Management Frames are not encrypted in WLAN networks and this causes WLAN networks to be vulnerable to Denial of Service Attacks (DoS). Let us see a few of the Denial of Service attacks which Attackers can use to disrupt few or all of the users in a WLAN network. DoS Attacks Following frames can break the existing wireless connection (without PMF support) and will lead to Denial of Service attack. Sending Deauth or Disassoc notification to AP Sending (Re) Association request to AP. Sending Auth frame to AP. Sending Deauth or Disassoc notification to Station Sending Channel switch announcement to Station. How to solve the problem? Once the 4 way Handshake is done, the AP and the STA have the PTK and GTK to encrypt data. The same keys can now be used to encrypt Management frames to provide a certain level of Protection against DoS Attacks. Access Point and the Station both needs to have s
Read more

Power Saving Techniques

-
Image
Why it is so Important? As you are aware that most of the Wifi Devices are Battery Operated such as Mobile Phones, Laptops etc. It is very important to consider the Power consumed of every component of such devices. If the device drains its battery too often, then it limits it mobility capability. It is very essential to conserve the battery when the device is not using any of such components. For Ex: Screen times out if there is no activity by User. Similarly when there is no active data transfer over Wifi, it is best to put it in a low power consumption mode to avoid Battery Wastage. Basic Mechanism: 1. STA sends out a packet to AP indicating that it is going to sleep mode. 2. AP Start buffering data for the client and indicates that there is data buffered in Beacon. 3. STA wakes up, listens to Beacon and sees if there is any data buffered for it. If no, go back to sleep. If yes, send a packet to AP to say that it is awake and send the buffered data. 4. AP after sending th
Read more